sample preparation
The urine of female Sika deer was collected 26 to 32 days or 66 days after reproduction for detection. Take 3 clear drops of urine sample for direct measurement (if the urine sample is cloudy, it must be filtered or centrifuged at 15 ° C for 10 minutes until clear). Samples that are not currently in use should be frozen and stored.
Store at room temperature and away from light, with a validity period of 12 months.
【composition】
1.20 test cards
2.20 straws
3.1 copy of instruction
【flow chart】
1. Collect the urine of the female Sika deer to be tested in a dry and clean container.
2. Remove the detection card from the aluminum foil bag and place it horizontally on the desktop.
3. Use a straw to suck urine, add 3 drops of urine to the sampling hole (S) of the detection card, and let it sit at room temperature for reaction. The results are judged in minutes for 5-15 minutes, and results exceeding 15 minutes can only be used as a reference.
【note】
1. The optimal temperature for use of this product is around 25 ℃ at room temperature. Please pay attention to the ambient temperature when using, as too low a temperature will cause strong color rendering
Decreased degree affects the judgment of results.
2. The sample tested for this product can only be sow urine; If the color of the C and T lines is weak, the reaction time can be appropriately extended.
3. The sampling time should be between 26 and 32 days or 66 days after breeding, and the samples collected at other times will be tested
The results of the test are not accurate (it is possible that pregnant sows are not pregnant).
4. It is prohibited to collect urine from pigs on the ground for testing.
If the test results are suspicious, samples can be taken later for retesting, but the sampling time must be within the sampling time interval.
6. This product is for one-time testing and cannot be reused.
7. After opening the aluminum foil bag, the detection card should be used as soon as possible; The detection card will become invalid after getting damp.
8. Do not touch the white film surface in the center of the detection card.
9. Use within the validity period.
